logo2

logo
 

The Hybrid Auxiliary Power Unit
System w/ 3.5 KW Generator Part No. 090-00487

Model No.: DPS6500
MSRP: 7999.00

With a Diamond Power Systems APU, you can turn off your engine, turn on the comfort, and turn down your operating costs. Externally mounted on the side-rail, the Diamond Power APU is protected in its own weatherproof compartment and runs off the truck's fuel supply. The diesel-powered APU saves fuel, runs quieter than the truck engine, reduces emissions, charges your rig?s batteries, and provides reliable, all-night comfort with 120-volt AC power and exceptional heat and air-conditioning.

The Diamond Power APU saves fuel, and keeps you up to date with the law, because you don't need to idle your main engine to enjoy all the comforts of home. It uses diesel fuel right out of your truck's fuel tank. The APU mounts to the side-rail of your rig and is protected by a weather-proof enclosure. Day or night, in the hottest or coldest parts of the country, the Diamond Power APU keeps you comfortable, and save you about 75% compared to idling the main engine. With its economical installation costs, 2 year / 2000 hour warranty and nationwide warranty service & parts availability, Diamond Power has thought of everything. We have engineered and built our APU's around a driver's life on the road, and given you the most important benefits of all... comfort and peace of mind. Rest easy with a Diamond Power Systems APU.


The Diamond Power APU

* Runs sleeper air conditioning
* Runs sleeper heating
* Runs cabin household accessories
* Recharges your truck's batteries
* Warms the engine
* Monitors the batteries' charge

The Diamond Power APU is a fully contained auxiliary power unit in an easy-to-access and service, shock-resistant, weatherproof compartment that mounts directly to the frame rail.


Driver's Control Panel Diamond Power's advanced "Co-Pilot Design" control panel gives the driver easy access to control all features including start/stop, and heat and air conditioning from inside the cab or sleeper.

Weathertight, removable panels provide immediate access to serviceable components.

APU Specifications
HVAC Specifications
Engine 14 Hp, 2 Cylinder , Water cooled, Diesel Air Conditioning
10000 BTU/hr
Bore X Stroke 2.64" X 2.68" System capacity 64~68 oz of R-134A
Rated Power 6.5 KW @ 2600 RPM System oil capacity 14 oz of PVE (Polyvinylether)
Fuel Consumption .157 (20.07 oz) to 0.54 G/Hr ( 69.12 Ounces/Hr) based on load Compressor 6~10 Amp @ 120V
Electrical Draw AC: 4 kW DC: 0.8 kW Condenser Fan

9~12 Amp
Exhaust Temp 860°F Binary Pressure Switch Normally closed between 26~335 psi
Engine Oil 0.793G/3.0L (Use any API Service CF, CF-4, CG-4 or CH-4 oil) Operating Pressures Low side 24~45 psi, High side 110~250 psi
Valve Clearance 0.2~0.3mm Heat 5000/10000 BTU'hr (Low/High)
Engine Compression 300 PSI (2.0 MPa) Heater Draw 5K BTU - 1.3 kW, 10K BTU - 3.9 kW
Starter 160 Cranking Amps Speed Resister

25 Ohms
Noise Level (dB) 70 dB Heating Coils 10 Ohms each - dual
Alternator 60 Amp @ 14 V DC Thermo Fuse Blows at 307.4°F (152°C)
Generator 35 Amp @ 120V AC Weight 100lb
Oil Pressure Switch 7.1 ~ 142.2 psi (0.5 ~ 10 kgf/cm2) Dimensions (HVAC) 24.41" X 15.75" X 12.80"
Overheat Switch Close at 203°F
Intake & Ex. Valves Intake:26mm Ex.: 22.5mm
Alternator Belt Tension 45~55 ft-lb (61~75 N-M)
Generator Belt Tension 70~80 ft-lb (95~108 N-M)
Thermostat Starts to open at 160?F and fully open at 185°F
Weight 185lb @ Engine, 330lb @ APU
APU Dimensions 26" L X 21" D X 29" H
Condenser Dimensions 31.22"x 17.5" x 8.82"
Control Dimensions 6.3" x 3.94" x 1.18"



Call us now at 904-733-0948 to schedule your appointment and start saving money.